Energy Northwest has evaluated all its activities for their potential impact on the environment, and has identified those aspects that could have a significant impact if they were not controlled. This information is used to develop programs to prevent or mitigate potential impacts and to establish prioritized goals, objectives, and targets for continually improving performance.
Our significant environmental aspects fall into five categories:
Storage or Use of Petroleum, Chemicals, or Radioactive Materials
Land Use (including structure erection or alteration)
As a byproduct of our operations, we generate waste. These wastes include materials common to many businesses such as paper, aerosol cans, batteries, oils, paints, and construction debris. Operation of the Columbia Generating Station also results in the generation of hazardous and radioactive waste streams subject to additional regulation and special handling requirements. These wastes are carefully managed in compliance with stringent State of Washington Department of Ecology regulations.
We handle our waste in various ways, including non-hazardous and hazardous waste recycling, onsite treatment to reduce hazard or volume, accumulation for offsite disposal, and operation of an inert waste landfill.
Energy Northwest seeks to minimize its generation of waste, especially hazardous and radioactive waste. We conduct pollution prevention opportunity assessments to identify and implement activities that reduce waste and we have a comprehensive recycling program. We have a goal to eliminate hazardous materials spills. The major objectives of the Radioactive Waste Management Program are to limit, control, minimize, and measure the production of radioactive materials in solid waste, gaseous emissions, and liquid discharges.
In accordance with federal and state regulations, Energy Northwest operations are permitted to release a limited amount of gaseous emissions to the air. These emissions come from different sources, such as the use of diesel fuel in boilers and engines, use of refrigerants and solvents, fire suppression training, demolition of old asbestos containing materials, and operations of the Columbia Generating Station.
Energy Northwest seeks to minimize any hazardous and radioactive emissions to the air, both through careful controls and through minimizing the use of fuels and materials that create hazardous gases.
In accordance with federal and state regulations, Energy Northwest operations at Columbia Generating Station are permitted to release a limited amount of wastewater to the Columbia River. The Station uses water from the Columbia River as cooling water in its routine operation. Wastewater is treated, routinely tested for metals, chemicals, and radionuclides, and then returned to the river. We also maintain a sanitary wastewater treatment facility for all our routine operations as well as the operations of the U.S. Department of Energy 400 area.
As an industrial facility operator, Energy Northwest purchases a variety of petroleum, chemical, and radioactive materials that we store and use onsite. These include diesel fuel and gasoline, solvents and other chemicals, and new and spent nuclear fuel.
Energy Northwest seeks to minimize its storage or use of materials that may pose a risk to the environment, including petroleum, chemicals, and radioactive materials. Our Chemical Control Program for Columbia Generating Station was initiated as an industry good practice for controlling chemicals harmful to plant systems, structures, components, and personnel. The program is based on pre-screening and approval of chemicals for specific uses through the issuance of chemical “permits.” In addition to minimizing the unintentional contamination of process fluids and reducing the potential for corrosion of system component materials, the program contains elements to minimize fire hazards, the use of hazardous substances, chemical exposures to personnel, and the generation of hazardous and mixed wastes.
Our Pollution Prevention Program seeks to replace the use of hazardous materials with non-hazardous substitutes, such as latex paint instead of solvent based paint. To reduce exposure to PCB issues, Energy Northwest undertook a transformer retrofill program, converting PCB-contaminated transformers and capacitor to non-PCB equivalents. Removal of these chemicals greatly reduced the potential for a spill and environmental contamination.
Energy Northwest seeks to reduce its “footprint” on the natural landscape whenever possible. New projects, in particular, have the potential to result in adverse environmental impacts due to land use. These potential impacts include erosion by wind and water, destruction of wildlife habitat, introduction of noxious weeds, disturbance of cultural or public resources, and diminished aesthetic values. These impacts are anticipated and minimized through a comprehensive work planning and control process.
For example, the development of the Nine Canyon Wind Project required careful land use planning to reduce negative environmental impact. Our wind turbines were located on existing agricultural fields, which provides additional income to local farmers and helps maintain their fields as open space in active agricultural use.
We would like to hear your comments about our environmental policy and programs. If you have comments or questions, contact EMS Coordinator Don Coody at (509) 377-6113 or send an e-mail to drcoody@energy-northwest.com.